Jadex BL-POWER Series Crash Rated Bollards
Jadex’s Revolutionary POWER Series Bollards provide the ultimate protection from high and low-impact collisions.
Designed solely by Jadex International, these Bollard Systems provide a fair balance of aesthatics and security.
Being the most mature solution in modern Perimeter Security techniques, these are still very much reliable in securing Airports, Industries, Ware Houses, Hotels etc.
With the Jadex POWER Series Bollards System, you get the assurance of being secure in terms of physical vehicle security. These Products are designed based on the strictest of International Crash Test Standards.
Anti-Ram/ Crash Rating: Designed to stop 7.2 ton fully loaded vehicle at speeds of 48 kmph, 64 kmph & 80 kmph, respectively known as K4 (M30), K8 (M40) & K12 (M50) Crash rated Bollards as per IWA 14-1:2013
Drive Unit (External/ Internal): Hydraulic/ Pneumatic/ Electromechanical
Rising Height: 800 mm – 1200 mm
Diameter of Bollard Tubes: 220 mm, 273 mm, 356 mm
Material: High Strength structural steel
Cylinder Top Plates: Anti-Slip Die cast aluminum/ stainless steel/ mild steel plates/ sheet
Input Voltage: ‘440VAC ± 10%, 50/60 Hz, 3 Phase’ or ‘220 VAC ± 10%, 50/60 Hz, Single phase’
Rising Time: 4-6 seconds; 1.5 seconds emergency operation (Optional)
Lowering time: 3-6 seconds; 1.5 seconds emergency operation (Optional)
Oil tank: 100 ltr to 250 ltr (Depends upon number of Bollards to be operated with Single Hydraulic Power Unit)
Oil level Sensor: Standard or Digital
Protection Class: IP 67
Surface Protection: Hot-Dip Galvanizing/ Zinc Coating/ Red Oxide layers/ Zinc Chromate Coating
Finish: Multiple layers of Anti-UV Epoxy Powder Coating/ Anti-UV Epoxy Paint/ Stainless Steel Chrome Finish or Stainless-Steel Sleeve (Optional)
Blocking Provisions: Self-Lockable at any position to avoid any unauthorized person to forcefully operate the Bollard(s)- Hydraulic/ Pneumatic/ Electromechanical Lock
Breakout Resistance: 7,20,000 J
Operating Temperatures: -20°C to +70°C
MCBF: 70,00,000
Duty Cycle: up to 100%
Control provisions: Suitable to be controlled with all Access control devices, like Biometrics, LRR/ ANPR, UHF, RFID, Card reader etc.
Integration Provisions: Can be integrated with Traffic Light, Boom Barriers, Crash Pads, Spike barriers, UVSS, etc.
SAFETY
Safety against Vehicles: Loop Detectors
Safety against Humans/ Animals: Photo sensors
Control Unit: PLC or Micro controller or Electric Relay based
Visual & Sound: Embedded LED flashing lights on the top of Bollard head & buzzer for operational alert along with Red/ Yellow Radium reflective strips
Driver Alert: Traffic Light (Red/ Green)- Optional
POWER FAILURE
For Raising the Bollards: Manual Hand Pump
For Lowering the Bollards: Mechanical Manual Release Lever
Accumulator (Optional): Accumulator for up to 04 cycles up/ down operations in case of emergency
» Chrome Plated/ Stainless Steel Sleeve covering on Bollard Cylinder.
» Integration with a wide range of access controllers viz. LRR/ RFID/ Biometrics/ LPR/ ANPR/ Conventional Boom Barrier.
» Remote/ Wifi Controllers.
» Traffic Light.
» Warning Indicators.
» Emergency Fast Operation of upto 1.5 seconds.
K4 Crash Rated Bollards
The barrier having this crash rating is able to stop a 7.5 ton moving truck at a speed of 48 Km/h, or any other vehicle coming with equivalent energy.
K8 Crash Rated Bollards
The barrier having this crash rating is able to stop a 7.5 ton moving truck at a speed of 64 Km/h, or any other vehicle coming with equivalent energy.
K12 Crash Rated Bollards
The barrier having this crash rating is able to stop a 7.5 ton moving truck at a speed of 80 Km/h, or any other vehicle coming with equivalent energy.